|
[+] more product images Product Images are for illustration purposes only and may not represent the actual product. |
NetComm CC100 Coax MDU Master Bridge
|
||||||||||||||
The CC100 Coax MDU Master Bridge allows the management of a multi-dwelling building to supply triple play broadband service to residents/guests over their existing coaxial cable network. No additional wiring is necessary as the CC100 takes a broadband signal, together with a TV signal, and distributes it together over the coaxial network where it becomes available at each connected coax port.
When paired with one of NetComms CC101 Coax Slave Ethernet Bridges, the signal that is sent around the coax network is made available to be redistributed at the resident/guests room.
FEATURES:
- Use a multi-dwelling buildings existing coaxial cable network as a distribution backbone
- Built-in filter to eliminate noise from the TV/antenna
- Endpoint service and bandwidth control
- Remote web configuration and diagnosis
- QoS prioirt and mapping support
- Working in unison with the CC101, can be configured with a billing solution
SPECIFICATIONS
NETWORK STANDARDS
- HomePNA 3.1 over Coaxial Cable (HCNA)
- IEEE 802.3 and IEEE 802.3u
- IEEE 802.3x
TRANSMISSION POWER AND SPECTRUM
- 8 +/- 1 dBm
- 12-28MHz
TRANSMISSION SPEED AND RANGE
- Up to 128Mbps
- Up to 50dB Attenuation
(-176dBm/Hz Noise Floor)
FAST ETHERNET INTERFACE
- 10/100Mbps
- MDI/MDI-X Auto Crossover
QUALITY OF SERVICE
- Priority Based on 802.1p, IP TOS and
TCP/UDP Port
- Based on HomePNA Parameterized QoS
NETWORK MANAGEMENT
- Web and CLI Configuration
- SNMP, DHCP Client and Relay (Option 82)
- Auto-Configuration for Master and Endpoints
- System Firmware and HCNA Driver Upgrade
- Enable/Disable Endpoint Service
- Subscriber Host Number Control in Endpoint
- Bandwidth Control
- IGMP v2 Snooping Control
- Endpoint Ethernet Statistics and Status
- Diagnosis of HCNA Interface
- Noise Spectrum Analyzer Built-in
CONNECTORS
- Ethernet : Two RJ-45 Connectors
- HCNA: Two F-Type Female Coax Connectors,
One for HCNA, the Other for TV or Antenna
INDICATORS
- Power LED
- HCNA Link/Act, SyncMode, Diagnosis LED
- LAN1, LAN2 LED for LAN Port Link/Act
RESET BUTTON
- Reset System
- Force to Factory Settings
ENVIRONMENTAL CONDITIONS
- Operating Temperature : 0OC ~ 55OC (32OC ~ 131OC)
- Storage Temperature : –10OC ~ 70OC (14OC ~ 158OC)
- Operating Humidity : 10% ~ 95%, Non-condensing
POWER REQUIREMENTS
- External Power Supply : 5V DC
- Power Consumption : < 4.5 Watts
PHYSICAL DIMENTIONS
- 160mm (W) x 105mm (D) x 28mm (H)
UNIT WEIGHT
- 260 g
| Weight: 1 Kg |
Secure Transactions

|
Direct Deposit |
| Secured by 256 Bits SSL Encryption |